Mastercam X10官方正式中文版【64位】

尽管很多人看衰Mastercam，但是它依然是众多CAM软件中的佼佼者。小编这里为大家带来Mastercam X10汉化版，仅64位，完美破解安装，支持win7、win8.1以及win10系统。需要的朋友可以下载试试哦！

Mastercam x10汉化版安装教程

小编这里提供的是网盘地址，网盘可能会限速，可以在本站搜索百度云不限速版。

1) 双击 "setup.exe" 运行安装程序，然后在安装界面选择“安装MASTERCAM X10”...

2) 安装过程中当弹出 "Hasp" 和 "NetHasp" 的选项时，请必须选择 "Hasp" ；下一栏最好选择 "Metric" (即为公制单位)

3) 安装完成后先不要运行程序,请先在光盘内的"Crack"文件夹里双击 "m-mc10.exe" 进行解密, 解密的路径设为跟您刚才安装MASTERCAM X10 的路径相同, 如果解密不成功,系统会弹出警告: "Cannot open'XXX:\XXX\...\mastercam.exe file',Please make sure that location you've specified is corret." 此时您必须重新正确设置路径再继续.

4) 解密完成后接着安装 "MastrcamX10简体中文汉化包.exe"

5) 建议您把 "MastrcamX10简体中文汉化包.exe" 和 "MastrcamX10中文转英文.exe" 复制到安装目录下,以便于随时中英切换!

6) 现在您可以启动中文版的MASTERCAM.X10了!

7) 注意：如果您在启动MASTERCAM.X时提示 “No SIM found” 或 “没有SIM发现” 而进不了系统，那么请您打开安装目录下的“NHaspX.exe”（比如：C:\Mcamx\NHaspX.exe），在弹出的窗口里的 "SIM type:" 项后面选中 "HASP" 然后按 "OK" 退出即可！

PS：其实X10并没有出，现在最高的版本是9.1。

Mastercam x10新功能特色

Mastercam's Dynamic Motion toolpaths deliver these powerful benefits while helping you get the most out of any machine - new or old. Mastercam has included Dynamic Motion technology for more than five years and we are constantly expanding it across the core of the Mastercam suite. That means the speed and efficiencies are built into our software, with no extra cost to you.

Reduce Cycle Time

Dynamic Motion's material-aware technique can reduce cycle times by 25% to 75%.

Extend Tool Life

Dramatically extended tool life means fewer tool changes, more parts, and less expense.

Reduce Machine Wear

Smooth motion and fewer toolpath reversals mean that your machines take less wear and tear.

Dynamic Milling

Aggressive cuts, consistent chip load, and superior heat management supercharge your milling.

Dynamic Turning

Minimized air cutting and consistent tool wear boost cycle efficiency and cutter life.